Saka Engineering Systems Private Limited - Manufacturer of Spray Dryers & Fluid Bed Dryers from Pune

Minimum Order Quantity

1 Unit

Gas temperature:

50-8 degree C

Nozzle meterial:

carbon steel/PP/PVC

Bulb Temperature

45 Degree C

Liquid gas ratio:

2.5-4 L/m

Wet scrubbers wash dust and particles out of the air. A wet scrubber is based on the venturi scrubber principle.

Working of Wet Scrubber:

Exhaust air is forced into a spray chamber, where fine water particles cause the dust to drop from the air stream.
The dust-laden water is then treated to remove the solid material and is often recirculated.
The outlet air from the spray dryer containing powder particles is accelerated to a high velocity in the venturi inlet, where also the liquid is injected through full cone nozzles.
Passing through the subsequent diffuser the dissolving process will continue simultaneously with a certain pressure recovery of the air/droplet mix.
Passing through the separator, air and liquid are separated again. The air leaves through the centre duct and the liquid has reached the wet bulb temperature ~45 °C through the bottom outlet for further processing or recycling depending on what system is selected.

Products